Recently, the long-awaited iOS 13 update was released - we talked about its main features in a separate articles. Sometimes, iOS update might have cool features, but also a bunch of bugs. Sometimes installing the update leads to the fact that the smartphone freezes on the loading screen and does not want to turn on. Also, such a problem may occur after rebooting the device. Sometimes the iPhone freezes when connected to a PC or a failed Jailbreak - what is it?
Most common it a hardware problems - as a rule, after an unsuccessful or self-repair, liquid damage. To prevent such a sad outcome, we recommend that use only the advice of an authorized Apple service center. Fortunately, in many cases, everything is easy to fix on your own without contacting the service. We’ll show you some proven methods that will help to revive the iPhone, which is keep bootlooping.
This method helps not only in case of breakdowns, but also with PCs, mobile and mobile gadgets. The process to launch Hard Reset depends on the model of your iPhone. Starting from iPhone 5 to iPhone 6s+ you can use this combination: Holding Power Button and Home Button for 15 seconds once you see Apple logo release buttons.
For iPhone X and up just follow these steps to force restart your stuck iPhone:
- Quickly press then release the Volume Up key.
- Quickly press then release the Volume Down key.
- Press and hold the Side button for about 10 seconds then release when you see the Apple logo.
If these method is not helping, feel free contact us.
Based on my experience all the iPhone's not good enough water proof with timing, you can touch your phone with your wet hands or moisture can go through. Sometimes user's of Apple products update their phones with not full Battery it might cause update interruption. On latest iOS, Software Update turns on automatically. Let's say: you receive an update on your phone it will download it automatically, and it will install it, once you leave your phone on charge overnight with WiFi connection. There's only two solutions when Apple product stuck on Apple Logo.
Try to update your iPhone not Restore, if update is successful then it's software issue.
If you can't update your phone don't keep try it. It might cause software encryption at the end you will your data. Also, an error can occurs, like Error 4013, 4014, 26., all these errors related with hardware issue. Error 4013 means there's shortage on FaceID circuit on the Logic board. Error 4014 and 26 most likely it's Battery or NAND Component on the motherboard. I hope no one facing these problems, in case something happens with your phone NiceRepair would be more than happy to help.
There's some tip, how to Fix FaceID